The KanexPro High Speed HDMI cables with Ethernet are for applications that require high-performance transmission of HDMI digital video and multi-channel audio signals. These cables have active amplification built-in to the cable prevent impedance mismatch, caused by the cable attenuation, dielectric losses and compensation for skin effect over long distances.
For flawless transmission, the output of the cable is placed at the end of the display to amplify full signal transmission with zero signal loss. These cables are fully CL3 certified which surpasses any in-wall code requirement for residential or commercial installations.
High Speed HDMI cables with Ethernet
CL3 Rated for In-Wall Installation
Supports 3D and 4Kx2K
Compatible with prior versions of HDMI and DVI
Data rates up to 10.2 Gbps
Support color depths to 48-bits
Available in lengths of 25 feet, 50 feet, 75 feet and 100 feet
24 AWG Copper Wire Construction
Note: The 25ft cable does not include the booster chip for equalization since active sync and equalization is built-in to the cable.
Standards: High speed HDMI cable with Ethernet
Data rates: Up to 10.2 Gbps
Color Depth Support: 30 bit, 36 bit and 48 bits (16 bits per color)
Vertical Frequency: Supports 60Hz & 120Hz DC-coupled inputs and outputs
Regulatory Compliance: RoHs compliant and CL3 rated
Temperature: -40°C to +85°C operating range
Shielding & Protection:
Triple-layer shielding for EMI/RFI rejection
24 AWG copper wire construction
HDMI Cable Diameter: 0.37″ (9.5mm)
HDMI Connector: 0.55″ H x 0.8″W x 1.5″L
Net Weight: 1.2 lbs
Warranty: Full 1-Year parts and labor